[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: technical help



Title: Message
Paul, you then have BIND 9 installed.
 
I personally have very little experience with BIND 9. All  my BIND work is with BIND 8. The last time I fiddled with BIND 9, it only wanted to run as root, and not the user named; but that's a long time ago.
 
You need to find a way to start the BIND process. But first, see if it is running. I am not sure what process name it runs under on Redhat, but you could try one of these commands:
 
ps -ax | grep named, or ps -ax | grep bind
 
If nothing comes up, try to start it. Locate the BIND binary using the whereis command. You may be looking for a file called named, or bind, or something like that. You could also load the manpages to read about the file distribution of BIND 9 on your system. Once you locate the file, and start the BIND process, you should be able to start resolving Internet addresses, as long as your /etc/named.conf file is intact.
 
Regards,

Mark Tinka - CCNA
Network Engineer, Africa Online Uganda

-----Original Message-----
From: Paul [mailto:pademmy at yahoo.com]
Sent: Wednesday, June 18, 2003 12:25 PM
To: mtinka at africaonline.co.ug
Subject: RE: technical help

hello mark,
 
am sorry is a redhat linux ver. 7.2
 
when I used rpm -q bind8 it reply not installed, when I used rpm -q bind9 it repl not installed, but when I used rpm -q bind it reply BIND-9.1.3-4
And when I checked the directory cd /etc/init.d I see ypbind and open it to see the content it reads
ypbind: starting the ypbind daemon
tbis is a daemon which runs on NIS/YP client and binds them to a NIS domain.
thanks

Mark Tinka <mtinka at africaonline.co.ug> wrote:
Use the RPM command to check whether you have bind installed:
 
rpm -q bind8, or rpm -q bind9, or just rpm -q bind
 
You can also check /etc/init.d/ to see if you have the BIND name server binary/daemon there.
 
When you say Linux 7.2, is that Redhat, or SuSE, or Mandrake e.t.c You may want to be more specific.
 
Regards,

Mark Tinka - CCNA
Network Engineer, Africa Online Uganda

-----Original Message-----
From: Paul [mailto:pademmy at yahoo.com]
Sent: Wednesday, June 18, 2003 11:37 AM
To: mtinka at africaonline.co.ug
Subject: RE: technical help

Hi mark,
Know I don't have firewall running of my system. and it is a linux system with version 7.2
I thought BIND comes automatically with linux 7.2 when you install linux or do I need to install BIND separately after I might have installed linux?
how can I know or confirm if BIND is running in the background of linux 7.2
 
this is copy my named.conf file
 
## named.conf configuration for bind
#
# Generated automatically for bindconf, alchmist et al.
control {
         inet 127.0.0.1 allow { localhost; } keys { rndckey; };
};
 
include "/etc/rndc.key";
options {
           directory "/var/named/";
};
 
zone "." {
            type hint
            file "named.ca";
};
 
zone "0.0.127.in-addr.arpa" {
         type master
         file "0.0.127.in-addr.arpa.zone";
};
 
zone "localhost" {
         type master;
         file "localhost.zone";
};
 
 
And what of my resolve.conf how is it suppose to look like?
 
thanks so much for your assistant, I appreciate.
 
-Ajayi

Mark Tinka <mtinka at africaonline.co.ug> wrote:
Hi Paul.
 
Do you have a firewall running on your system? What system is this? What DNS software are you running [BIND I hope], and what version. Is BIND running in the background? Do you have a firewall, I ask again?
 
Please paste a copy of your named.conf file. First, we get the DNS working, then look at Apache.
 
Regards,

Mark Tinka - CCNA
Network Engineer, Africa Online Uganda

-----Original Message-----
From: Paul [mailto:pademmy at yahoo.com]
Sent: Wednesday, June 18, 2003 10:20 AM
To: mtinka at africaonline.co.ug; 'Fisayo Adeleke'; afnog at afnog.org
Subject: technical help

hello ,
 
Pls I need help on troublshooting my Apache and DNS setup and Config. I went to http://ws.afnog.org site to get some hint but the links there are not working properly.
pls can anyone help me with how to complete the setup and config of the apache becos I have configured the apache on my network, I can access it within my network but it not be reach outside my network.
and likewise my DNS is still not resolving yet I can not browse the internet with it.
pls I need tech. help on how to go about it
 
thanks for your techical assistant.
 
-Ajayi
 


Paul Ademola Ajayi
Systems/Network Administrator
Orbit Wireless Internet Services
Plot 32, No. 6 Birabi Street, Off Presidential Hotel
G.R.A. Phase I Port Harcourt, Rivers State, Nigeria.
Tel.:234-84-573479 GSM:234-803-6700115
E-mail:pademmy at yahoo.com


Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!


Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!


Paul Ademola Ajayi
Systems/Network Administrator
Orbit Wireless Internet Services
Plot 32, No. 6 Birabi Street, Off Presidential Hotel
G.R.A. Phase I Port Harcourt, Rivers State, Nigeria.
Tel.:234-84-573479 GSM:234-803-6700115
E-mail:pademmy at yahoo.com


Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!