[afnog] JUNIPER EX2200 PoE problem giving power to devices!

[Fabian Jr]

Have tried to disconnect every thing did a reboot (request system reboot) in vain


This happened after the storm

Sent from my BlackBerry 10 smartphone.
From: Mark Tinka
Sent: Friday, 24 April 2015 16:33
To: Fabian Jr; afnog at afnog.org
Subject: Re: [afnog] JUNIPER EX2200 PoE problem giving power to devices!




On 24/Apr/15 15:13, Fabian Jr wrote:
>
> dear all
>
> we have the above switches and yesterday we experienced a big thunder
> blow out which brown some of our equipment.
>
> all Juniper EX2200 PoE swithces are not giving power to AVAYA Phone
> handset,
>
> the show poe controller command shows this:
>
>
>
> admin at DAR-ANS-ASW01> show poe controller
> Controller  Maximum   Power         Guard    Management  Status
> index       power     consumption   band
>    0        405.00W   1460.22W*      15W                 AT_MODE
>   *Total power consumption exceeds recommended maximum power allowable.
>   Use 'show poe interface' to check the port(s) that are drawing more
> power than allowed.
>
> is there a work around ?
>
> pls. assist

Have you tried disconnecting some (not all) of the IP phones to see if
the error goes away?

Assume you didn't have this issue before the storm, yes?

Mark.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.afnog.org/pipermail/afnog/attachments/20150424/1d4ac1da/attachment.html>