[afnog] Difference between mac address on interface and mac address in the arp table
Christian M
chrismuhirwa at hotmail.com
Wed Mar 18 07:03:00 UTC 2015
the 4500 is only learning 0024.9798.3e25
Subject: Re: [afnog] Difference between mac address on interface and mac address in the arp table
To: chrismuhirwa at hotmail.com; afnog at afnog.org
From: mark.tinka at seacom.mu
Date: Wed, 18 Mar 2015 09:00:23 +0200
On 17/Mar/15 19:18, Christian M wrote:
Hello.
We are trying to set up an Ethernet over SDH link across
multiple ADMs (from different vendors) linking on one end a
cisco 6500 and on another a cisco 4500. We have been
successful in getting the MAC address learned across the end
points of the link.
However on the c4500, the mac address learned is the one on
the physical interface of the c6500 (the same as the one on
show interface) which is different from the one on the arp
table. I have put the show command below on the c6500 which is
on my end.
GigabitEthernet4/14
is up, line protocol is up (connected)
Hardware
is C6k 1000Mb 802.3, address is 0024.9798.3e25
(bia 0024.9798.3e25)
Protocol
Address Age (min) Hardware Addr Type
Interface
Internet
10.10.10.2 - 0024.97d2.bf00
ARPA GigabitEthernet4/14
Internet
10.10.10.1 0 Incomplete ARPA
interface
GigabitEthernet4/14
ip address
10.10.10.2 255.255.255.252
I need help figuring out why the c4500 on the other end of
the EoS link is learning 0024.97d2.bf00 instead
of 0024.97d2.bf00 (which is in arp table) in how I can make
this work.
Is the 4500 learning 0024.9798.3e25 or 0024.97d2.bf00?
Mark.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.afnog.org/pipermail/afnog/attachments/20150318/25f29503/attachment.html>
More information about the afnog
mailing list