[afnog] Removing the four stale TAL from the APNIC RPKI validation set.

[George Michaelson]

Updating RPKI trust anchor configuration
-------------------------------------------------------

APNIC has completed the process of transitioning from its previous Resource Public Key Infrastructure (RPKI) trust anchor arrangement to a new single trust anchor configuration.  Each RIR will publish an 'all resources' global trust anchor, under which its own regional resources (IP addresses and ASNs) will be certified. APNICs trust anchor is one of the previous five, which has been retained as the sole trust anchor  over all APNIC resource certificate products.

If you are using relying-party software, such as the Dragon Research Labs RPKI Toolkit, RPSTIR or the RIPE NCC’s RPKI Validator, you are advised to update your software’s configuration to use only the current APNIC trust anchor, rather than the set of five APNIC trust anchors that were previously in use. The update is to remove four of the five: One has been retained as the current live Trust Anchor. Note: this update is not critical. However, if it is not done, the software will log or report warnings about being unable to retrieve the trust anchors that are no longer being used. All resources now validate under the single active trust anchor and no orphan products are valid under the other prior trust anchors.

The current APNIC TAL is as follows:

------
rsync://rpki.apnic.net/repository/apnic-rpki-root-iana-origin.cer

MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAx9RWSL61YAAYumEiU8z8
qH2ETVIL01ilxZlzIL9JYSORMN5Cmtf8V2JblIealSqgOTGjvSjEsiV73s67zYQI
7C/iSOb96uf3/s86NqbxDiFQGN8qG7RNcdgVuUlAidl8WxvLNI8VhqbAB5uSg/Mr
LeSOvXRja041VptAxIhcGzDMvlAJRwkrYK/Mo8P4E2rSQgwqCgae0ebY1CsJ3Cjf
i67C1nw7oXqJJovvXJ4apGmEv8az23OLC6Ki54Ul/E6xk227BFttqFV3YMtKx42H
cCcDVZZy01n7JjzvO8ccaXmHIgR7utnqhBRNNq5Xc5ZhbkrUsNtiJmrZzVlgU6Ou
0wIDAQAB
------


Configuring Relying Party Software
-----------------------------------------------

RIPE NCC RPKI Validator:  If you upgrade to RIPE validator rpki-validator-app-2.24 the correct Trust Anchor is configured.  No further work is required.

Dragon Research Labs Rcynic Validator:  If you run rcynic, you need to remove all the TAL, TA or CER entries in rcynic.conf except ones which point to apnic-rpki-root-iana-origin.cer or the related TAL. If you use the trusted-certs/ directory, simply remove the four files which are named for the non-APNIC RIR as follows:

cd /etc/trust-anchors # or wherever you place the TAL files
rm apnic-rpki-root-ripe-origin.tal
rm apnic-rpki-root-arin-origin.tal
rm apnic-rpki-root-lacnic-origin.tal
rm apnic-rpki-root-afrinic-origin.tal

RPSTIR  To modify an installed RPSTIR system, locate the /usr/local/etc/rpstir  directory and remove all but the current live APNIC TAL.

More information is in the attached PDF describing how to update the trust anchor configuration in these three popular relying-partner software systems.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: update-tal.pdf
Type: application/pdf
Size: 38687 bytes
Desc: not available
URL: <http://www.afnog.org/pipermail/afnog/attachments/20180227/2b702bd1/attachment-0001.pdf>
-------------- next part --------------



-George
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Message signed with OpenPGP
URL: <http://www.afnog.org/pipermail/afnog/attachments/20180227/2b702bd1/attachment-0001.sig>