[afnog] Flapping POS Interface on Frame-relay between a Juniper and Cisco

[Righa Shake]

Scott,

The devices are not connected back to back.

The link is such that its comes via Fiber SDH and terminates from an ADM
equipment to the Router POS interface.

Regards,
Righa Shake

On Sat, Nov 19, 2011 at 11:19 PM, Scott Weeks <surfer at mauigateway.com>wrote:

> --- righa.shake at gmail.com wrote:
> From: Righa Shake <righa.shake at gmail.com>
>
> Am having a problem that is buffling.
>
> I recently changed a POS link encapsulation from PPP to Frame-relay.
> Since that time the POS interface keeps resetting from time to time.
>
> On my BGP session am receiving cease notifications from my upstream
> provider.
>
> The setup is such that we have a cisco on one end and a Juniper on the
> other.
> -------------------------------------------------------
>
>
>
>
> If I remember correctly, the frame-relay setting on a cisco is proprietary
> to cisco.  You need to set both sides to a standard protocol both devices
> adhere to.
>
> Also, are these connected back-to-back?  Or, are they connected to an ILEC
> switching device?
>
> scott
>
> _______________________________________________
> afnog mailing list
> http://afnog.org/mailman/listinfo/afnog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://afnog.org/pipermail/afnog/attachments/20111121/51ac5846/attachment.html>