[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cisco 3600 Boot Problem



This looks like an image problem. Try putting a new image in.
You may transfer the image through hyperterminal to the console.

Cheers,



> 
> Did you try to upgrade the IOS? I am far from an expert in cisco stuff
> but the one time this happened was when I was changing an IOS image
> and in the middle of the transfer of the image, there was an
> interruption and yet I had deleted the old one for space reasons.... x
> 
> Sematimba Noah Kevin
> Systems Administrator
> Africa Online Uganda Limited
> Commercial Plaza Kampala Road
> e-mail: ksemat at africaonline.co.ug
> WEB: http://www.africaonline.co.ug
> TEL: +256(41)258143
> FAX: +256(41)258144
> 
> On Fri, 13 Sep 2002, Fisayo Adeleke wrote:
> 
> > Hi all,
> >
> > I just got this cisco 3600 series router and i have a problem with
> > booting it up. When i switch it on and monitor through the console
> > connection, it gives the ffg messages.
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc1) C3600 processor with 32768 Kbytes of main memory Main
> > memory is configured to 32 bit mode with parity enabled
> >
> > loadprog: bad file magic number:      0x0
> > boot: cannot load "flash:"
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc1) C3600 processor with 32768 Kbytes of main memory Main
> > memory is configured to 32 bit mode with parity enabled
> >
> > PCMCIA Slot0: No Card Present
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc1) C3600 processor with 32768 Kbytes of main memory Main
> > memory is configured to 32 bit mode with parity enabled
> >
> > PCMCIA Slot1: No Card Present
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc1) C3600 processor with 32768 Kbytes of main memory Main
> > memory is configured to 32 bit mode with parity enabled
> >
> > loadprog: bad file magic number:      0x0
> > boot: cannot load "flash:"
> >
> > System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc1) C3600 processor with 32768 Kbytes of main memory Main
> > memory is configured to 32 bit mode with parity enabled
> >
> > rommon 1 >
> >
> > I'll appreciate help from anybody
> >
> > regards
> >
> > -fisayo
> >
> > -----
> > This is the afnog mailing list, managed by Majordomo 1.94.5
> >
> > To send a message to this list, e-mail afnog at afnog.org
> > To send a request to majordomo, e-mail majordomo at afnog.org and put
> > your request in the body of the message (i.e use "help" for help)
> >
> > This list is maintained by owner-afnog at afnog.org
> >
> >
> 
> 
> -----
> This is the afnog mailing list, managed by Majordomo 1.94.5
> 
> To send a message to this list, e-mail afnog at afnog.org
> To send a request to majordomo, e-mail majordomo at afnog.org and put
> your request in the body of the message (i.e use "help" for help)
> 
> This list is maintained by owner-afnog at afnog.org
> 



Antonio Godinho
B.Sc., MCP, MCP+Internet, MCSE, CCNA
Address:Av. Julius Nyerere 947 3rd floor esq 
Maputo - Mozambique
Phone  : 258-82-300392
e-mail : ANTONIO at nambu.uem.mz

An expert is one who knows more and more 
about less and less until he knows absolutely 
everything about nothing.
                     

-----
This is the afnog mailing list, managed by Majordomo 1.94.5

To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)

This list is maintained by owner-afnog at afnog.org