[afnog] RIB/FIB size

[ibtisam jamal]

Hi Noah,

Thanks.

What if I want to check current size of the FIB/RIB in the routers ?What
command ?

Regards,
Ibtisam Jamal

On Thu, May 4, 2017 at 5:06 PM, Noah <noah at neo.co.tz> wrote:

> Hi Ibtisam,
>
> I tend to think that FIB/RIB depends on someones configuration but in any
> case for that particular platform from juniper forums, folks are suggesting
> below numbers.
>
> RIB IPv4 capacity = 6.000.000.
>
> FIB IPv4 capacity = 550.000
>
> FIB IPv6: 375.000
>
> RIB IPv6: 3.000.000
>
> However if you have access to an *m10i *iron, I would seriously recommend
> you try below cmd-lines and see what max-prefix you get for both inet and
> inet6.
>
>
> *root# set routing-options maximum-prefixes?  *
>
>
> *root# set routing-options rib inet6.0 maximum-prefixes ?   *
>
> Cheers,
>
> Noah
>
> On Thu, May 4, 2017 at 1:29 PM, ibtisam jamal <ibty.jamal at gmail.com>
> wrote:
>
>> Hi All ,
>>
>> Please advice what is the RIB and FIB size for  Juniper m10i Routing
>> Engines ( RE-5.0 and RE-B-1800x1 ).
>>
>>
>> Regards,
>> Ibtisam Jamal
>>
>>
>>
>>
>> _______________________________________________
>> afnog mailing list
>> https://www.afnog.org/mailman/listinfo/afnog
>>
>
>
>
> --
> *./noah*
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.afnog.org/pipermail/afnog/attachments/20170504/f668a87b/attachment.html>